| Power Mode | |
| Max. Average Power | 20 W |
| Min. power | 25 mW |
| Response time (0-90%) | Typ. 70ms (min. 50 ms – max. 90 ms) |
| Power Calibration Uncertainty | ± 3% |
| Power linearity | ± 5% |
| Absorber Specs | |
| Aperture | 16 mm x 16 mm |
| Type | K |
| Absorber Spectral Range | 0.2 - 25 µm |
| Calibration Spectral Range | 0.25 - 1.1 µm ; 10.6 µm |
| Max Power Density (1) | 1.5 KW/cm² |
| Max Energy Density J/cm² (2) | 1 J/cm² |
| Amplifier Specs | |
| Amplifier Input Voltage | ±7 to ±12 VDC, or 14 to 24 VDC floating |
| Output Voltage @ Full Scale | 5 V |
| Min Detectable Voltage | 5 mV |
| Sensitivity | 250 mV/W |
| General Characteristics | |
| Cooling | Water (a) |
| Weight | 300 g |
| Head dimensions | 56 x 56 x 34 mm |
| Cable length - connector | 1.5 m - Bare Wire |
| Notes | |
| (1) Measured at 1064 nm, 10 W. Damage thresholds depend on power level. (2) 10ns @ 1064 nm | (a) Water min. 2 l/min, max. 4 l/min (@ 15 - 30 °C); admissible rate of water temperature variation < 1 °C/min |
Seçenekleri yapılandır
Şartlar ve Koşulları okuyun